Mitsubishi Electric QJ71E71-100 User Manual page 205

(3) Stations that can be accessed when the remote password check is performed
When the CPU module is protected with a remote password, the stations accessible by the connected device and
the QCPU stations that can perform the remote password unlock/lock processes are limited to those in the same
network. The following shows an example of accessible stations.
When a remote password has been set in the QCPU on the station 1-1, and the remote password check
Ex.
has been set in 1) on the station 1-1
Station B
Programming tool
Ethernet Network No.2
Station 2-1
QCPU
Station C
*1 The station A is the only connected device that can perform an unlock/lock process for 1) of the station 1-1.
: Stations that can be accessed from the connected device without performing the remote password unlock process
Connected
*2
device
Station 1-1 QCPU
(request source)
●
Station A
Station B
Station C
Station D
*2 The station A can access the stations marked with ● after the remote password unlock process is completed for 1) of the
station 1-1. It can access the stations marked with
access the stations marked with
Station 1-2
Station A
Network No.1
Station 1-1 1)
Remote Remote
password
password
check
QCPU E71
1) Station 2-2
E71
QCPU
●: Stations that can be accessed from the connected device after the remote password unlock process,
Target programmable controller station (request destination)
Station 1-2 Station 2-1
QCPU
when the communication lines are open.
1)
E71
QCPU
Ethernet
2) Station 3-2
E71
Network No.3
1) 2) Station 3-1
E71 E71
QCPU
Station 2-2
QCPU QCPU
● ●
when the communication lines are open. Stations B, C, and D can
CHAPTER 14 OTHER FUNCTIONS
1)
QCPU E71
Ethernet
1)
E71
Station D
Station 3-1 Station 3-2
QCPU QCPU
● ●
14
203