Mitsubishi Electric QJ71E71-100 User Manual page 261

(3) Send data
Device Item
Send data
(S3)+0
length
(S3)+1
to Send data
(S3)+n
(4) Functions
• This instruction sends the data specified by (S3) to the connected device of the connection specified by (S1)
for the module specified by Un.
CPU module
(S3) Send data length
Send data
:
:
Send data
Setting data
Specify send data length. (Depending on the procedure of
fixed buffer communications, the data length is the
number of words or the number of bytes.)
Procedure exists (communications using a binary
code): Number of words
Procedure exists (communications using an ASCII
code): Number of words
No procedure (communications using a binary code):
Number of bytes
Specify the send data.
Fixed buffer data area
BUFSND
No.16
CHAPTER 15 DEDICATED INSTRUCTIONS
Setting range
E71
No.1
:
No.n Connected device
:
Set by
-
1 to 1017
User
1 to 508
1 to 2046
- User
259
15