Mitsubishi Electric QJ71E71-100 User Manual page 223

(3) Redundant settings
Configure the settings of the system B and issue of a system switching request.
Item
Station Station No.
Number and
Mode Setting
Mode
(System A)
Station Station No.
Number and
System B
Mode Setting
Mode
Setting
(System B)
Input Format
IP Address System A
Setting
System B
Issue system switch in Cable disconnection
timeout
Cable Disconnection Timeout
Setting
Issue system switch in communication error
System switching settings when
communication error occurs
Description
Displays the settings configured in the basic setting.
Set the station number and mode of the system B. Set a different
station number from that of the system A. Set the same mode as the
system A.
Select an input format.
Displays the settings configured in the Ethernet operation setting.
Set the IP address of the system B. Set a different IP address from
that of the system A.
Select whether a system switching request is issued upon detection of
disconnection.
Set the time from when disconnection is detected until the system
switching request is issued to the control system CPU module.
Select whether a system switching request is issued upon a
communication error.
Set the target connection where a communication error will cause a
system switching request to be issued.
CHAPTER 14 OTHER FUNCTIONS
Setting range
-
Same as system A
Same as system A
-
Same as system A
Selected/not
selected
0.0s to 30.0s
Selected/not
selected
Target connection
221
14