6.2.3
Wiring with the QJ71E71-B2
The following describes connection and disconnection of the coaxial cable.
(1) Connecting the cable
1.
Align the groove [1] with the groove [2] and push the connector in.
2.
While pushing the connector in, rotate it one-quarter clockwise until it securely locks into place.
3.
Check that the connector is locked.
(2) Disconnecting the cable
1.
Rotate the connector one-quarter counterclockwise and pull out the connector.
CHAPTER 6 INSTALLATION AND WIRING
[2]
[1]
6
79