Mitsubishi Electric QJ71E71-100 User Manual page 152

(2) Interrupt settings
The following is a setting example.
Project window
IE/MELSECNET]
Item
Input Format
Device Code
Channel No./Connection No.
Interrupt (SI) No.
*1 Do not set the same interrupt (SI) numbers as those to be set for an interrupt of other communications using a fixed
buffer or the RECV instruction.
Interrupt (SI) numbers can be assigned by the user to receive up to 16 communications using a fixed buffer and
communications using the RECV instruction in an interrupt program. The user must manage the interrupt (SI) numbers
assigned for receiving data.
150
[Parameter] [Network Parameter]
[Interrupt Settings]
Description
The input format of each data is decimal number only.
Select a device code. Select "Fixed Buffer" in this setting.
Set the connection number of the fixed buffer to trigger the
interrupt program.
Set the interrupt control number for the E71 for when an interrupt
request is issued from the E71 to the CPU module.
[Ethernet/CC
Setting range
Fixed Buffer
1 to 16
0 to 15
*1
-