6.2
Wiring
This section describes Ethernet cable wiring and wiring precautions. For a network configuration and cables and hubs
used, refer to "SYSTEM CONFIGURATION". (
6.2.1
Wiring with the QJ71E71-100
The following describes connection and disconnection of the Ethernet cable.
(1) Connecting the cable
1.
Check the orientation of the connector and insert the Ethernet cable connector into the E71 until it
clicks into place.
(2) Disconnecting the cable
1.
While holding down the Ethernet cable tab, pull out the cable.
76
Page 62, CHAPTER 5)