Appendix 9.2 Sample Program - Mitsubishi Electric QJ71E71-100 User Manual

Appendix 9.2
The following sample program is used to read D0 to D4 (five points) of a target programmable controller using a logical
station number.
(1) Window example (Form1)
(2) Program example
Program examples for development software below are described on the following pages.
• Visual Basic
®
• Visual C++
Sample Program
Text1: A logical station No. is entered.
ACT control (ActEasyIF): ACT control for the utility setting type
®
.NET 2003
.NET 2003
3.
Use a function to write the program that reads the
device data.
4.
Click the "Read Device" button.
Button1 or Command1:
Connects the communication line.
Button2 or Command2:
Reads the device data.
Button3 or Command3:
Cuts off the communication line.
APPENDICES
A
391