Mitsubishi Electric QJ71E71-100 User Manual page 368

(2) Method using direct connection to the CPU module
This test is to check the existence of an E71
network where a station connected to the programming tool exists or to check the existence of a connected
device, such as a personal computer, having a specified IP address, by directly connecting the programming tool
and the CPU module.
Specifying the station
executing the test
using the network No.
and station No.
*1 This also applies to QnA/A series modules. However, for an AJ71E71, AJ71E71-B2, and AJ71E71-B5, software
versions S and later are required.
*2 The PING test cannot be executed on the own station.
(a) Applications
By specifying the execution station and the target station, the PING test can be executed from a remote device.
(b) Operating procedure
Use the following procedure.
366
Programming tool
*1, *2
that has completed the initial process on the same Ethernet
CPU module
PING test executing station
Specifying the target station
using the IP address
1.
Click the
Diagnostics" window.
[Diagnostics]
"Target Module Setting" under "Module No."
Ethernet
E71
(PING test target station)
button in the "Ethernet
[Ethernet Diagnostics]