Peripheral Drive Circuit - Star Micronics FVP10 series Hardware Manual

This printer is equipped with a circuit for driving peripheral devices such as cash drawers.
There is a peripheral drive connector (6-pin modular plug) at the drive circuit output. To use the drive circuit, connect a cable
to this connector (the cable is not included in the package).
The recommended cable specifications are indicated below.
Recommended cable specifications
Modular jack plug
Peripheral drive connector

17. Peripheral Drive Circuit

Shield
Wire lead
DK
DC
24V
Manufacturer
MOLEX
AMP
FCI
Note: Connect a shielded wire to pin 1 (frame ground).
- 56 -
Model
90075-0007
641337
B-66-4