Output Terminals - YASKAWA V1000 Quick Start Manual

Type No. Terminal Name (Function)
RP Multi-function pulse train input (frequency
reference)
+V Analog input power supply
Main
Frequency A1 Multi-function analog input 1 (frequency
Reference reference)
Input
Multi-function analog input 2 (frequency
A2
reference)
AC Frequency reference common
n

Output Terminals

Type No.
MA N.O. (fault)
Multi-Function
<1>
MB N.C. output (fault)
Digital Output
MC Digital output common
P1 Photocoupler output 1 (During run)
Multi-Function
Photocoupler P2 Photocoupler output 2 (Frequency agree)
Output
PC Photocoupler output common
MP Pulse train output (Output frequency)
Monitor Output
AM Analog monitor output
AC Monitor common
<1> Do not assign functions to digital relay outputs that involve frequent switching. This may shorten relay
performance life. Switching life is estimated at 200,000 times (assumes 1 A, resistive load).
<2> Connect a suppression diode as shown in
the diode rating is greater than the circuit voltage.
<3> When set for sourcing. +5 V/1.5 kΩ or higher, +8 V/3.5 kΩ or higher, +10 V/10 kΩ or higher.
<4> When set for sinking, the external power supply should be +12 Vdc, ±5% with 16 mA or less.
YASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide
Table 3.7 Control Circuit Output Terminals
Terminal Name (Function)
Figure 3.14
3.5 Control Circuit Wiring
Function (Signal Level) Default Setting
Response frequency: 0.5 to 32 kHz
(Duty Cycle: 30 to 70%)
(High level voltage: 3.5 to 13.2 Vdc)
(Low level voltage: 0.0 to 0.8 Vdc)
(input impedance: 3 kΩ)
+10.5 Vdc (max allowable current 20 mA)
Input voltage 0 to +10 Vdc (20 kΩ) resolution 1/1000
Input voltage or input current (Selected by DIP switch
S1 and H3-09) 0 to +10 Vdc (20 kΩ),
Resolution: 1/1000
4 to 20 mA (250 Ω) or 0 to 20 mA (250 Ω),
Resolution: 1/500
0 Vdc
Function (Signal Level) Default Setting
Digital output
30 Vdc, 10 mA to 1 A; 250 Vac, 10 mA to 1 A
Minimum load: 5 Vdc, 10 mA (reference value)
Photocoupler output 48 Vdc, 2 to 50 mA
<3> <4>
32 kHz (max)
0 to 10 Vdc (2 mA or less) Resolution: 1/1000
0 V
when driving a reactive load such as a relay coil. Ensure
<2>
3
67