European Standards; European Standards; Ce Low Voltage Directive Compliance - YASKAWA V1000 Quick Start Manual

C.1 European Standards
C.1

European Standards

The CE mark indicates compliance with European safety and environmental regulations and
is required for engaging in business and commerce in Europe.
European standards include the Machinery Directive for machine manufacturers, the Low
Voltage Directive for electronics manufacturers and the EMC guidelines for controlling noise.
This drive displays the CE mark based on the EMC guidelines and the Low Voltage Directive.
• Devices used in combination with this drive must also be CE certified and display the CE
mark. When using drives displaying the CE mark in combination with other devices, it is
ultimately the responsibility of the user to ensure compliance with CE standards. After
setting up the device, verify that conditions meet European standards.
• Low Voltage Directive: 73/23/EEC, 93/68/EEC
u

CE Low Voltage Directive Compliance

This drive has been tested according to European standard EN50178, and it fully complies
with the Low Voltage Directive.
To comply with the Low Voltage Directive, be sure to meet the following conditions when
combining this drive with other devices:
n Area of Use
Do not use drives in areas with pollution higher than severity 2 and overvoltage category 3 in
accordance with IEC664.
n Installing Fuses on the Input Side
Always install input fuses that comply with UL standards to prevent the drive from short
circuits. Refer to Factory Recommended Drive Branch Circuit Protection on page 217
the appropriate fuse based on the maximum input of the drive.
Normal Duty Ratings on page 156
n Guarding Against Harmful Materials
When installing IP20/Open-Chassis drives, use an enclosure that prevents foreign material
from entering the drive from above or below.
204
Figure C.1 CE Mark
for information on drive input and output currents.
YASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide
Refer to Heavy Duty and
for