YASKAWA V1000 Quick Start Manual page 171

No. Name
PID Feedback Reference Missing
b5-12
Detection Selection
b5-13 PID Feedback Loss Detection Level Sets the PID feedback loss detection level.
b5-14 PID Feedback Loss Detection Time Sets the PID feedback loss detection delay time.
b5-15 PID Sleep Function Start Level
b5-16 PID Sleep Delay Time
b5-17 PID Accel/Decel Time
b5-18 PID Setpoint Selection
b5-19 PID Setpoint Value
b5-20 PID Setpoint Scaling
b5-34 PID Output Lower Limit
b5-35 PID Input Limit
PID Feedback High Detection
b5-36
Level
PID Feedback High Level Detection
b5-37
Time
b5-38 PID Setpoint / User Display
b5-39 PID Setpoint Display Digits
Frequency Reference Monitor
b5-40
Content during PID
Reverse Operation Selection 2 by
b5-47
PID Output
b6-01 Dwell Reference at Start
b6-02 Dwell Time at Start
b6-03 Dwell Frequency at Stop
b6-04 Dwell Time at Stop
Use b8 parameters to configure the energy saving/conservation drive function.
b8-01 Energy Saving Control Selection
YASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide
0: Disabled.
1: Feedback loss detected when PID enabled. Alarm output, operation
is continued without triggering a fault contact.
2: Feedback loss detected when PID enabled. Fault output, operation
is stopped and a fault contact is triggered.
3: Feedback loss detection when PID disabled by digital input. No
alarm/fault output. "PID feedback loss" digital output is switched.
4: PID Feedback error detection when PID disabled by digital input.
An alarm is triggered and the drive continues to run.
5: PID Feedback error detection when PID disabled by digital input.
Fault is triggered and output is shut off.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1014 and later.
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1020 and later.
b6: Dwell Function
Use b6 parameters to configure dwell function operation.
Refer to V1000 Technical Manual for details.
b8: Energy Saving
0: Disabled
1: Enabled (set b8-04)
B.1 Parameter Table
Description
B
171