Lo/Re Led And Run Led Indications - YASKAWA V1000 Quick Start Manual

u

LO/RE LED and RUN LED Indications

LED Lit
When a Run command
is selected from the
LED operator
(LOCAL)
During Run
As shown
<1> Refer to Figure 4.1
<2> Refer to the description for parameter U4-21 on page
Flashing
Flashing
ON
quickly
Drive output frequency
/
Frequency setting
RUN LED
YASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide
Flashing
–
• During deceleration to
stop
• When a Run
command is input and
frequency reference is
0
for the difference between "flashing" and "flashing quickly".
1 s
ON
ON
Figure 4.1 RUN LED Status and Meaning
RUN
during stop
6 Hz
0 Hz
OFF
Figure 4.2 RUN LED and Drive Operation
4.1 Using the Digital LED Operator
Flashing Quickly
<1>
–
• During deceleration
at a fast-stop.
• During stop by
interlock operation.
<2>
200 for information on verifying operation interlock.
ON
ON ON
STOP
ON
Flashing
Off
Run command is selected
from device other than LED
operator (REMOTE)
During stop
RUN
STOP
OFF OFF
85
4