YASKAWA V1000 Quick Start Manual page 196

B.1 Parameter Table
No.
Digital Operator Display
o1-03
Selection
Frequency Reference Setting and
o1-10
User-Set Display
Frequency Reference Setting /
o1-11
Decimal Display
o2-01 LO/RE Key Function Selection
o2-02 STOP Key Function Selection
o2-03 User Parameter Default Value
o2-04 Drive Model Selection
Frequency Reference Setting
o2-05
Method Selection
Operation Selection when Digital
o2-06
Operator is Disconnected
Motor Direction at Power Up when
o2-07
Using Operator
o2-09
Use o3 parameters to Read, Copy and Verify the parameter settings to and from the drive.
o3-01 Copy Function Selection
o3-02 Copy Allowed Selection
Accumulated Operation Time
o4-01
Setting
Accumulated Operation Time
o4-02
Selection
Cooling Fan Operation Time
o4-03
Setting
o4-05 Capacitor Maintenance Setting
Soft Charge Bypass Relay
o4-07
Maintenance Setting
o4-09 IGBT Maintenance Setting
196
Name
0: Hz
1: % (100% = E1-04)
2: r/min (enter the number of motor poles into E2-04/E4-04/E5-04)
3: User defined by parameters o1-10 and o1-11
Refer to V1000 Technical Manual for details.
o2: Multi-Function Selections
Use o2 parameters to configure LED digital operator key functions.
Refer to V1000 Technical Manual for details.
Enables/Disables the operator panel STOP key when the drive is
operated form external sources (not operator).
0: Disabled.
1: Enabled
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
0: Data/Enter key must be pressed to enter a frequency reference.
1: Data/Enter key is not required. The frequency reference is adjusted
by the "up" and "down" arrow keys.
0: The drive will continue operation
1: The drive will trigger a fault (oPr) and the motor will coast to stop
Refer to V1000 Technical Manual for details.
– Factory use
o3: Copy Function
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
o4: Maintenance Period
Use o4 parameters to perform maintenance.
Sets the starting value for the cumulative operation time of the drive in
units of 10 h.
0: Logs power-on time
1: Logs operation time when the drive output is active (output operation
time).
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
YASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide
Description