Vca Configuration; Reboot; Factory Default - 3xLogic VX-VTOF-01 User Manual

Visix time of flight people tracking camera

Hide thumbs Also See for VX-VTOF-01:

Table of Contents

6.4 VCA Configuration

To configure video analytics for the device, refer to the VCAsys On-Line Help manual for the

corresponding configuration instructions.

Perform the following procedures to reset your device:

Steps:

Press the Reset button, and hold it for 2 seconds while the device is powered on.

Wait for the system to reboot.

< Device Top with Mount Cover Removed >

CAUTION:

Please do not press the reset button for more than 2 seconds. Otherwise, the camera may be

switched to its factory default settings.

Resetting the device back to the factory default will initialize all the parameters of the device. However,

the factory default performed via the device's webpage allows certain main parameters to be preserved.

On the Camera

Steps:

Press the reset button for 10 seconds by making sure that booting is complete on the device.

Wait for the system to reboot.

On the Webpage

Steps:

Go to Setup > Maintenance > Reset All Settings on the camera's webpage.

10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC

User Manual | VISIX Time of Flight People Tracking Camera

* Reset button: Press the reset button by

using a sharp tip such as a ball point pen.

Table of Contents

Show Quick Links

Table of Contents