COOLING SYSTEM - Water Pump
5.
INSTALL WATER PUMP PULLEY, FAN AND DRIVE
BELT
(a) Install the pump pulley, the fluid fan and coupling (fan
spacer) assembly with the four nuts.
(b) Place the drive belt on each pulley.
(c) Stretch the belt tight and torque the four nuts.
Torque: 200 kg-cm (14 ft-lb, 20 N-m)
(d) Adjust the drive belt deflection.
(See step 3 on page CH-5)
CO0957
6.
FILL WITH ENGINE COOLANT (See page CO-5)
7.
START ENGINE AND CHECK FOR LEAKS
CO-9