Assembly Of Alternator; Install Rotor To Drive End Frame; Install Rectifier End Frame - Toyota 1PZ Repair Manual

CH-16
Pulley
Type A
CHARGING SYSTEM - Alternator
(b) Using SST and a press, press in a new bearing and
SST SST 09285-76010
CH0201

ASSEMBLY OF ALTERNATOR

(See page CH-8)
1.

INSTALL ROTOR TO DRIVE END FRAME

(a) Place the rectifier end frame on the pulley.
(b) Install the rotor to the rectifier end frame.
CH0850
2.

INSTALL RECTIFIER END FRAME

(a) (Type A)
CH0879
(b) Using a plastic-faced hammer, lightly tap in the end
CH0871
(c) (PZJ, HZJ and HDJ)
(d)
CH0855
bearing cover.
Place the alternator washer on the rotor.
frame.
Install the codenser and four nuts.
(HZBandHDB)
Install the four nuts.