Install Camshaft - Toyota 1PZ Repair Manual

EM-78 ENGINE MECHANICAL - Cylinder Head
(d) 2nd, retighten the cylinder head bolts 90° in the
numerical order shown above.
(e) 3rd, retighten cylinder head bolts by an additional 90°.
(f) Check that the painted mark is now facing rearward.
4.

INSTALL CAMSHAFT

(a) Install the camshaft thrust plate to the cylinder head.
(b) Install the camshaft bearings to the No.1 bearing cap
and No.1 journal of the cylinder head.
(c) Place the camshaft on the cylinder head, facing the
key groove upward.
(d) Install the six (1PZ) or seven (1 HZ and 1HD-T) bear-
ing caps in their proper locations.
(e) (1PZ)
Install and uniformly tighten the twelve bearing cap
bolts in several passes in the sequence shown.
Torque:
No.1 journal
Others
250 kg-cm (18 ft-lb, 25 N-m)
185 kg-cm (13 ft-lb, 18 N-m)