EM-18
ENGINE MECHANICAL - Engine Tune-Up
(b) Submerge the filter element in the water and agitate it
(c) Repeat rinsing in clean water unitil rinse water is clear.
(d) Remove excess water by shaking the filter element or
NOTICE: Do not beat or drop filter element.
(e) Wipe off dust on the air cleaner case interior.
INSPECTION OF ALTERNATOR DRIVE BELT
(See step 3 on page CH-5)
Drive belt deflection:
Drive belt tension (Reference):
INSPECTION OF GLOW PLUGS
(See page ST-7)
up and down more than ten times.
blowing with compressed air.
New belt
6 - 7 mm (0.24-0.28 in.)
Used belt 8-11 mm (0.31 -0.43 in.)
New belt
45-55 kg
Used belt 20-35 kg