Table of Contents
Advertisement
FU-12
FUEL SYSTEM - Injection Nozzles (1 PZ and 1 HZ)
COMPONENTS
DISASSEMBLY OF INJECTION NOZZLES
DISASSEMBLE INJECTION NOZZLES
SST 09268-64010
not to drop the inner parts.
CLEANING AND INSPECTION OF INJECTION
NOZZLES
1.
fingers.
(a) Using SST, remove the nozzle holder retaining nut.
NOTICE:
When disassembling the nozzle, be careful
(b) Remove the pressure spring, shim, pressure pin, dis-
tance piece and the nozzle assembly.
NOZZLE CLEANING
(a) To wash the nozzles. Use a wooden stick and brass
brush. Wash them in clean diesel fuel.
HINT:
Do not touch the nozzle mating surfaces with your
Advertisement
Table of Contents
Troubleshooting
