Toyota 1PZ Repair Manual page 193

FU-54 FUEL SYSTEM Injection Pump
HINT:
• For a measurement between listed sizes, use the next
larger size. Ex. If thickness is 1.1 mm (0.043 in.) by
calculation, use a 1.2 mm (0.047 in.) shim.
• Select two shims which have the same thickness.
11. (IPZonly)
ADJUST PLUNGER ADJUSTING SHIM
(a) Install the coupling and face camplate.
HINT: Do not assemble the coupling spring.
(b) Clean the plunger adjusting shim and contacting
surface area.
(c) Align the pin groove of the pump plunger with the
face camplate pin.
(d) Using SST, install the used plunger adjusting shim
and pump plunger.
SST 09260-54012 (09269-54030)
(e) Install the distributive head with the four bolts.
Torque: 120 kg-cm (9 ft-lb, 12 N m)
NOTICE: Be careful not to damage the pump
plunger.
(f) Using vernier calipers, measure dimension B indicated
in the illustration.