Toyota 1PZ Repair Manual page 221

FU-82 FUEL SYSTEM Injection Pump
(c) (1HD-T (w/ PCS))
Apply vacuum to the PCS actuator.
(d) (1HD-T)
Measure the injection volume at each pump rpm and
boost pressure.
If the injection volume at 100 rpm is not as specified,
replace the governor sleeve plug as follows:
• Using SST and a press, press out the sleeve plug
assembly from the governor sleeve.
SST 09236-00101 (09237-00070)
• Remove the E-ring and following parts from the
sleeve plug:
(1) Stop ring
(2) Bearing and two bearing retainers