Power Control System; On-Vehicle Inspection; Inspect Power Control System; Inspection Of Power Control System Components - Toyota 1PZ Repair Manual

FUEL SYSTEM - Power Control System (PCS) (HDB30 (w/ M/T) only)
15. FILL WITH ENGINE COOLANT (See page CO-5)
16. START ENGINE AND CHECK FOR FUEL LEAKS
17. CHECK IDLE SPEED AND MAXIMUM SPEED
(See page EM-27)
POWER CONTROL SYSTEM (PCS)
(HDB30(w/ M/T) only)

ON-VEHICLE INSPECTION

INSPECT POWER CONTROL SYSTEM (PCS)
(a) Start the engine.
(b) Depress the clutch pedal and check the operation of
the actuator at each shift position.
Standard:
Shifting to 1st or Reverse
Sifting to other positions
INSPECTION OF POWER CONTROL SYSTEM
(PCS) COMPONENTS
1. INSPECT PCS VSV
A. Inspect VSV for open circuit
Using an ohmmeter, check that there is continuity between
the terminals.
Resistance (Cold): 33-39 Q
If there is no continuity, replace the VSV.
B. Inspect VSV for ground
Using an ohmmeter, check that there is no continuity
between each terminal and the body.
If there is continuity, replace the VSV.
FU-95
Actuator not
operating
Actuator operates