EM-28
ENGINE MECHANICAL
(b) Start the engine.
(c) Depress the accelerator pedal all the way.
(d) Check the maximum speed.
Maximum speed:
1PZ and 1 HZ 4,500 - 4,700 rpm
1HD-T
(e) Adjust the maximum speed.
• Disconnect the accelerator linkage.
• Cut out the seal wire of the maximum speed adjust-
• (w/ HAC and 1HD-T)
SST 09275-54020
• (w/o HAC)
• Adjust the maximum speed by turning the MAXI-
Maximum speed:
1 PZ and 1 HZ 4,600 rpm
1HD-T
HINT: Adjust at idle speed. Then, raise engine speed and
recheck the maximum speed.
• (w/ HAC and 1HD-T)
SST 09275-54020
• (w/o HAC)
• Recheck the maximum speed.
• Reconnect the accelerator linkage.
• After adjustment, adjust the accelerator linkage.
• Seal the maximum speed adjusting screw with a
Engine Tune-Up
4,300-4,500 rpm
ing screw.
Using SST, loosen the lock nut of the maximum
speed adjusting screw.
Loosen the lock nut of the maximum speed adjust-
ing screw.
MUM SPEED ADJUSTING SCREW.
4,400 rpm
Using SST, securely tighten the lock nut.
Securely tighten the lock nut.
new seal wire.