Handling Received Messages (Read-Out, Printing, Saving, And Deleting) - JRC JUE-87 Instruction Manual

3.3 Handling Received Messages (Read-out, Printing, Saving, and Deleting)

The received EGC messages are printed out immediately when the MES receives them, in the case of the
automatic message print out function (see 3.2.2.6) is turned on. They are erased from older ones when
stored calls exceed more than its maximum capacity, 100 calls, or 40K bytes. If the numbers of calls
exceed 100, the call logs are deleted from older ones. When you need to read out, print out, saving,
or deleting the messages, follow the below procedures.
JUE-87 has function that EGC message is read out from JRC MFD via LAN.
Please refer to the MFD's documentation about the MFD corresponding to this function and the
operation method.
(1) To read out, print out, and save the message
Step Operation
1
･Move the cursor to
"read Out" and
press Enter key.
2
･Select the type of
message list you want
to see.
3
･Move the cursor to
the message you want
to read and press
Enter key.
4
･To print out the message,
press F5 ("Print out").
5
･To save the message,
pressF6 ("save as") key.
6
･Enter the file name
and press Enter key.
･Press F10 ("Previous")
key to return main menu.
REFERENCE
IME/DTE Response
･"Read-out" window is
displayed. It shows 3 types
of message list.
･The message list you have
chosen is displayed.
Each message list displays
received messages in
chronological order.
(The newest message is
displayed at the top of list.)
･The message you want to
see is displayed.
･Press F10 ("Previous") key
to return to main menu when
you do not need to print out.
･The message is printed out.
･The "File name" is displayed.
･"Now saving data.
Please wait" is displayed.
3-16
Remarks
"Inm-C":"Inm-C message list"
"Egc" : "Egc message list"
"All" : "reception message list"
(Received all messages )
* "Inm-C" and "All" cannot be
used in this model.
･Lower 2 lines show
the description of the
received message.
･Under line shows the
characters received in error.
･Press F10 ("Previous") key
to return to main menu when
you do not need to save it.
･Blank space cannot be used
for file name.
･Using received day for file
name, is convenient for you.