Using Buttons When Operating A Model; The; Royal Sx Menu Structure - Multiplex Royal SX 9 Instructions Manual

ROYAL SX
When you enter a letter at the start of a text input, or
after a space, this is automatically displayed as a
capital letter, with the following letters automatically
set in lower case. If you wish to enter a series of capi-
tal letters, simply 'leaf past' the lower-case letters, and
the capitals will follow. When you select a letter, the
cursor automatically moves on to the next position.
The cursor can also be moved forward or back manu-
ally to any position using either of the two 3-D digi-
adjusters.
Text input is concluded by pressing the ENTER but-
ton. The screen now displays a request to input text:
Clear rest
of line?
REV
Yes -> /
CLR
No -> ENTER
 Pressing the REV/CLR button erases all inputs af-
ter the last position of the cursor.
 Pressing ENTER leaves the text unchanged.
Entering special characters:
Certain buttons can also be used to enter characters
in addition to the printed ones, such as accented let-
ters and other special characters:
Button Character
A B C Ä 1 a b c ä
ABC1
D E F 2 d e f
DEF2
G H I 3 g h i
GHI3
J K L 4 j k l
JKL4
M N O Ö 5 m n o ö
MNO5
P Q R 6 p q r
PQR6
S T U Ü 7 s t u ü
STU7
V W X 8 v w x
VWX8
Y Z
YZ_9
{ }
0 / ? ! - + % # & < >
/-#0
*
11.1.2.

Using buttons when operating a model

The REV/CLR button resets all timers to
the set alarm times.
The 3-D digi-adjusters can be allocated
to any parameter which is marked in the menus with a
hyphen "-" ( 20.1.).
F
Button is used to unlock / lock the values allo-
cated for adjustment:
Fig. 11.1.2.1.: Aileron Expo allocated to the right-hand 3-D
digi-adjuster
a. Value locked
26
9 y z _ ( )
Space character
b. Value unlocked
11.2. The ROYAL SX menu structure
You will find a diagram of the ROYAL SX menu struc-
ture in the coloured A3 supplement to the manual.
Please refer to the supplement when reading this sec-
tion.
The ROYAL SX has four menu levels:
 Status displays (not shown in the Overview)
 Main menu
 Menu
 Sub-menu
The Status display supplies information about the
transmitter and the current model, and is divided up
over four screens. You can switch between the dis-
plays using the ▲ and ▼ buttons. The Status display
appears when you switch the transmitter on, or when
you leave the main menus. The four Status displays
are not shown in the Overview. Please see Chapter
( 10.6.) for details regarding the Status display.
The six main menus are called up using the six direct
menu access buttons. Within the main menus all you
will find is branches leading into the menus them-
selves. Each branch is always indicated by a series of
four full stops.
The menus can contain both branches into sub-
menus, as well as parameters.
The sub-menus only contain parameters.
Parameters are variable values which appear in
menus and sub-menus. Some only provide infor-
mation, but others are in a form which can be altered.
Invariable parameters are skipped when you leaf
through the menus.
Status displays
Main menus
Menus
Sub-menus
Fig. 11.2.1.: Menu structure in principle
( 10.8.)
Entry into the main menus using
one of the six menu buttons
xxxx ....
Branches into menus
xxxx ....
Branches into sub-menus
Variable parameters
Fixed parameters (information
only)
Variable parameters
Fixed parameters (information
only)