Model Memories; Switching To A Different Model Memory; Copying - Multiplex PROFI CAR 403 Operating Instructions Manual

Model memories 1

7.
The model memories are used to store all the settings which you have entered for a
particular vehicle. These settings include:
v
Modulation (FM/AM)
v
Servo direction, signal format, centre, travels
v
Settings for throttle, brake and steering
v
Timer settings
v
Trim settings
The information in the active model memory is updated when you switch off the
transmitter or switch to a different memory.
v
PROFI CAR 403
v
PROFI CAR 707
The memory space available is generous, and the spare memories can be exploited
to experiment with copying model data, or trying out different settings for a
particular race track.
7.1.

Switching to a different model memory

§ Search for the menu point GO TO using the 1 button
§
Select the target memory with the digi-adjustor
The screen shows the name, memory number and trim
settings.
§
Hold the handle button
3 sec to effect the switch.
A long beep confirms the switch, and the screen reverts to the operating display.
7.2.

Copying

§ Search for the menu point COPY using the 1 button
§
Select the target memory with the digi-adjustor
§
Hold the handle button
3 sec to confirm the copy.
The copy process is carried out, and the operating display re-appears. At the same
time the transmitter switches to the memory which you selected as destination for
the copy. The copy process copies the name as well as all the settings (but not the
trims). The previous contents of the target memory are overwritten by the new data.
1
6 model memories
12 model memories
G
pressed in for longer than
G
pressed in for longer than
37
GO TO
STAMP
Number
KOPIE
Name
BUGGY2
03
05