Parameter Group Display; Menu; Mixer Def; Defining A Free Mixer - Multiplex Royal SX 9 Instructions Manual

Charge
Parameter:
Function Displays the current state of charge of the bat-
tery in mAh; can be varied
Values
0mAh
Default According to state of charge of battery
SlfDsCharge (self-discharge)
Parameter:
Function Adjusts the battery management system to the
self-discharge rate of the rechargeable trans-
mitter battery in use
Values
norm.
Default
low (for PERMABATT+ battery type)

Parameter group Display

14.1.4.
Contrast
Parameter:
Function Optimises screen contrast to suit the operating
conditions
Values
-8 to +8
Default
0
Trim graph
Parameter:
Function Selects different methods of representing the
trim positions on screen
Values
0 to 5
Default
0
Menu Mixer def.
14.2.
This menu lists all fourteen available free mixers:
¡Define mixer
¨Exit
1 ELEVATR+ ....
2 V-TAIL+ ....
3 DELTA+ ....
4 AILERON+ ....
5 FLAP+ ....
ª6 <<MIX6>> ....
13 <<MIX13>> ....
14 <<MIX14>> ....
Mixer names consisting of up to eight characters can
be entered when the mixer is set up.
Mixers 1 to 5 are pre-defined, but can be modified in
any way you like.
Our standard for mixer names:
Capital letters with "+" suffix indicate that additional
inputs can be mixed into a basic function (e.g. Eleva-
tor).
Notes:
 The mixer definitions are "global": changes to the
mixer definition affect all models which make use
of that mixer.
 Up to five free mixers can be used for each model
(memory).
 The free mixers are only available for fixed-wing
model aircraft.
max. = set battery capacity
low
14.2.1.

Defining a free mixer

Each mixer can contain up to five inputs (transmitter
controls).
The servo travel is the sum of all mixer inputs. For this
reason we use the mathematical symbol for "sum" G
as the symbol for the mixers:
¡Define mixer
¨Exit
Name ELEVATR+
1 Elevator ON
2 Spoiler ON
3 Flap ON
4 Thr -Tr ON
5 -------- ----
Mixer input Switch Effect
14.2.2. Method of working and options for the
mixer inputs
These methods of working apply to all mixer inputs:
Symbol Effect Parameter in Mixer menu
symmetrical
™
----
asymmetrical
š
trv'
single-sided
›
----
single-sided
œ
pt1
with centre
Possible supplementary options are:
Symbol Effect Meaning
Automatic change of input direction
2 directions
2
from servo to servo
with Offset
Shifts the centre point of the input
+
Input only works when the trans-
with dead-
mitter control has passed the dead-
-
band
band
Not all combinations of effect and supplementary op-
tion make sense in practice. The available com-
binations are listed in the table below.
When you leaf through the methods of working during
the mixer definition procedure you will find the sym-
bols in the following order:
Symbol Effect Meaning
symmetrical,
™2
2 directions
symmetrical,
2 directions,
™2+
Shifts the centre of the servo /
with Offset
servos by the Offset offs
symmetrical,
™+
with Offset
symmetrical,
2 directions,
™2-
The input only takes effect when
with deadband
the transmitter control has
passed the deadband dead
symmetrical,
™-
with deadband
symmetrical
™
asymmetrical
š
asymmetrical,
š2
2 directions
Manual
Mixer name for
servo assignment
š
}
œ
The servo is con-
š
trolled by these inputs
›-
---

(Mixer option 14.2.2.)
trv
trv#
trv
pt2
Fig.






59