Removing An Optical Drive - Lenovo x3650 M5 Installation And Service Manual

DVD drive cable
Figure 90. Optical drive cable routing
Step 6. Replace the fan cage assembly (see "Replacing the fan cage assembly" on page 172).
Step 7. Replace the top cover (see "Replacing the top cover" on page 144).
Step 8. Slide the server into the rack.
Step 9. Reconnect the power cords and any cables that you removed.
Step 10. Turn on the peripheral devices and the server.

Removing an optical drive

Use this information to remove an optical drive.
You can go to "Front view" on page 18 to see the locations of an optical drive on the server.
To remove an optical drive, complete the following steps:
Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on
page 289.
Step 2. Turn off the server and peripheral devices and disconnect all power cords.
Step 3. Remove the server top cover (see "Removing the top cover" on page 143).
1
Step 4. Press and hold the release tab to the right as you
out of the bay.
160
Lenovo System x3650 M5 Installation and Service Guide
Optical drive
connector
2
1
Cable connector latch
2
push the drive from the rear to slide it