Lenovo x3650 M5 Installation And Service Manual page 232

Figure 169. Cable connection
11. Replace the fan cage assembly (see "Replacing the fan cage assembly" on page 172).
12. Replace the top cover (see "Replacing the top cover" on page 144).
13. Slide the server into the rack.
14. Reconnect the power cords and any cables that you removed.
15. Turn on the peripheral devices and the server.
For the left EIA assembly
1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on page 289.
2. Turn off the server and peripheral devices, and disconnect the power cord and all external cables.
3. Remove the top cover (see "Removing the top cover" on page 143).
4. Remove the fan cage assembly (see "Removing the fan cage assembly" on page 171).
5. Route the cable into the slot.
Figure 170. Cable routing
220
Lenovo System x3650 M5 Installation and Service Guide
Front USB / operator
information panel cable
EIA assembly