Lenovo x3650 M5 Installation And Service Manual page 325

If you have installed a USB hypervisor memory key on the SAS riser-card, see the user's guide that comes
with the hypervisor memory key. Hypervisor enables guest operating systems to function on the server.
For information about configuring the integrated Gigabit Ethernet controller, see "Configuring the Ethernet
controller" on page 57.
Instructions for Business Partners
Instructions for Business Partners on verifying the newly installed devices by running the Dynamic System
Analysis (DSA) stress test.
In addition to the instructions in this chapter for installing optional hardware devices, updating firmware and
device drivers, and completing the installation, Business Partners must also complete the following steps:
1. After you have confirmed that the server starts correctly and recognizes the newly installed devices and
that no error LEDs are lit, run the Dynamic System Analysis (DSA) stress test. For information about
using DSA, see "Dynamic System Analysis" on page 78.
2. Shut down and restart the server multiple times to ensure that the server is correctly configured and
functions correctly with the newly installed devices.
3. Save the DSA log as a file and send it to Lenovo. For information about transferring data and logs, see
"How to send DSA data" on page 313.
4. To ship the server, repackage it in the original undamaged packing material and observe Lenovo
procedures for shipping.
Support information for Business Partners is available at http://www.ibm.com/partnerworld.
How to send DSA data
You can use the Enhanced Customer Data Repository to send diagnostic data to IBM.
Before you send diagnostic data to IBM, read the terms of use at
http://www.ibm.com/de/support/ecurep/terms.html.
You can use any of the following methods to send diagnostic data:
• Standard upload:
http://www.ibm.com/de/support/ecurep/send_http.html
• Standard upload with the system serial number:
http://www.ecurep.ibm.com/app/upload_hw
• Secure upload:
http://www.ibm.com/de/support/ecurep/send_http.html#secure
• Secure upload with the system serial number:
https://www.ecurep.ibm.com/app/upload_hw
.
Chapter 5 Removing and replacing components
313