Lenovo x3650 M5 Installation And Service Manual page 550

Hide thumbs Also See for x3650 M5:

Table of Contents

Alert Category

Critical - CPU

SNMP Trap ID

CIM Information

Prefix: PLAT ID: 0044

User Response

1. Make sure that the latest levels of firmware and device drivers are installed for all adapters and

standard devices such as Ethernet and storage adapters. Important: Some cluster solutions

require specific code levels or coordinated code updates. If the device is part of a cluster

solution, verify that the latest level of code is supported for the cluster solution before you

update the code.

2. Update the firmware (UEFI and IMM) to the latest level (Updating the firmware).

3. Run the DSA program.

4. Remove the adapter to see if the problem is follwed adapter. if not, replace the adapter.

5. (Trained technician only) Replace microprocessor n.

6. (Trained technician only) Replace the system board. (n = microprocessor number)

• 806f0207-0302ffff : [ProcessorElementName] has Failed with FRB1/BIST condition. (CPU 2)

This message is for the use case when an implementation has detected a Processor Failed - FRB1/BIST

May also be shown as 806f02070302ffff or 0x806f02070302ffff

Automatically notify support