Lenovo x3650 M5 Installation And Service Manual page 282

3
2
Figure 232. Microprocessor socket levers and retainer disengagement
a. Identify which release lever is labeled as the first release lever to open and open it.
b. Open the second release lever on the microprocessor socket.
c. Open the microprocessor retainer.
Attention: Do not touch the microprocessor contacts. Contaminants on the microprocessor
contacts, such as oil from your skin, can cause connection failures between the contacts
and the socket.
Step 9. Remove the microprocessor from the socket.
a. Select the empty installation tool and ensure that the handle is in the unlocked position. If
the installation tool handle is not in the unlocked position, use the following instructions for
your installation tool:
• 1 lift the interlock latch and hold it up while you
tool handle counterclockwise to the unlocked position, and then release the interlock latch.
The following illustration of the installation tool shows the location of the interlock latch and
counterclockwise rotation of the handle before loading the microprocessor.
270
Lenovo System x3650 M5 Installation and Service Guide
Microprocessor
release lever
1
Microprocessor
release lever
2 twist the microprocessor installation