Lenovo x3650 M5 Installation And Service Manual page 264

Figure 203. System battery position
a. Tilt the battery so that you can insert it into the socket on the side opposite the battery clip.
Figure 204. System battery installation
b. Press the battery down into the socket until it clicks into place. Make sure that the battery clip
holds the battery securely.
c. If you removed a rubber cover from the battery holder, use your fingers to install the battery
cover on top of the battery connector.
Step 7. Reinstall the riser-card assembly 2 (see "Replacing a riser-card assembly" on page 181), if
necessary.
Step 8. Install the top cover (see "Replacing the top cover" on page 144).
Step 9. Slide the server into the rack.
Step 10. Reconnect the external cables; then, reconnect the power cords and turn on the peripheral devices
and the server.
Step 11. Start the Setup utility and reset the configuration.
252
Lenovo System x3650 M5 Installation and Service Guide
Battery