Lenovo x3650 M5 Installation And Service Manual page 175

Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
`
Appareil A Laser de Classe 1
Step 6. Touch the static-protective package that contains the new optical drive to any unpainted
metal surface on the server; then, remove the optical drive from the package and place it on
a static-protective surface.
Step 7. Follow the instructions that come with the drive to set any jumpers or switches.
Step 8. Attach the drive retention clip that you removed from the optical drive filler panel to the side of
the new optical drive.
Figure 93. Optical drive retention clip installation
Step 9. Align the optical drive in the drive bay and slide the optical drive into the optical drive bay until
the optical drive clicks into place.
Drive retainer clip
Figure 94. Optical drive installation
Step 10. Connect the optical drive cable (see "Replacing the optical drive cable" on page 158).
Step 11. Reconnect the power cords and any cables that you removed.
Drive retention clip
Alignment pins
.
Chapter 5 Removing and replacing components
163