Lenovo x3650 M5 Installation And Service Manual page 289

E5-x6xx v3
E5-x6xx v4
Figure 243. Installation tool
Microprocessor
Figure 244. Installation tool removal
Attention:
• Do not press the microprocessor into the socket.
• Make sure that the microprocessor is oriented and aligned correctly in the socket before
you try to close the microprocessor retainer.
• Do not touch the thermal material on the bottom of the heat sink or on top of the
microprocessor. Touching the thermal material will contaminate it.
Step 9. Remove the cover from the retainer bracket, if one is present. Store the cover in a safe place.
Lock Position Unlock Position
.
Chapter 5 Removing and replacing components
277