Plunger
Figure 195. 3.5-inch simple-swap backplate assembly/hot-swap hard disk drive backplane removal
• For twelve 3.5-inch hot-swap hard disk drive backplane
Plunger
Figure 196. 3.5-inch hot-swap hard disk drive backplane removal
Step 8.
Rotate the backplate assembly/backplane toward the rear of the server and lift the backplate
assembly/backplane up to remove it from the server.
Step 9.
If you are instructed to return the hard disk drive backplate assembly/backplane, follow all
packaging instructions, and use any packaging materials for shipping that are supplied to you.
Replacing the 3.5-inch simple-swap backplate assembly/hot-swap hard disk drive
backplane
Use this information to replace the 3.5-inch simple-swap backplate assembly/hot-swap hard disk drive
backplane.
244
Lenovo System x3650 M5 Installation and Service Guide
2
1
2
1
4
3
4
3