Lenovo x3650 M5 Installation And Service Manual page 82

– Simple Network Management Protocol (SNMP) version 3
– Common Information Model (CIM)
– Web browser
For more information about the integrated management module II (IMM2), see "Using the
integrated management module" on page 53, Appendix A "Integrated management module II
(IMM2) error messages" on page 315, and the Integrated Management Module II User's Guide at
http://www.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5086346.
• Dynamic System Analysis
Two editions of Dynamic System Analysis (DSA) are available for diagnosing problems, DSA Portable
and DSA Preboot:
– DSA Portable
DSA Portable collects and analyzes system information to aid in diagnosing server problems. DSA
Portable runs on the server operating system and collects the following information about the server:
– Drive health information
– Event logs for ServeRAID controllers and service processors
– IMM configuration information
– IMM environmental information
– Option card driver and firmware information
– Installed hardware, including PCI and USB information
– Installed applications and hot fixes
– Kernel modules
– Light path diagnostics status
– Microprocessor, input/out hub, and UEFI error logs
– Network interfaces and settings
– RAID controller configuration
– Service processor (integrated management module) status and configuration
– System configuration
– Vital product data, firmware, and UEFI configuration
DSA Portable creates a DSA log, which is a chronologically ordered merge of the system-event log
(as the IPMI event log), the integrated management module (IMM) event log (as the ASM event log),
and the operating-system event logs. You can send the DSA log as a file to Lenovo Support (when
requested by Lenovo Support) or view the information as a text file or HTML file.
Note: Use the latest available version of DSA to make sure you are using the most
recent configuration data. For documentation and download information for DSA, see
http://shop.lenovo.com/us/en/systems/solutions/.
For additional information, see "Dynamic System Analysis" on page 78 and Appendix C "DSA
diagnostic test results" on page 1055.
– DSA Preboot
DSA Preboot diagnostic program is stored in the integrated USB memory on the server. DSA Preboot
collects and analyzes system information to aid in diagnosing server problems, as well as offering a
rich set of diagnostic tests of the major components of the server. DSA Preboot collects the following
information about the server:
– Drive health information
– IMM2 configuration information
70
Lenovo System x3650 M5 Installation and Service Guide