Figure 106. Media cage removal
Step 7.
If you are instructed to return the media cage, follow all of the packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Replacing the media cage
Use this information to replace the media cage.
To install the media cage, complete the following steps:
Step 1.
Read the safety information that begins on "Safety" on page v and "Installation guidelines" on
page 289.
Step 2.
Turn off the server and peripheral devices and disconnect all power cords.
Step 3.
Remove the top cover (see "Removing the top cover" on page 143).
Step 4.
Carefully slide the media cage into the server.
Figure 107. Media cage installation
Media cage
Media cage
.
Chapter 5
Removing and replacing components
177