Front Propeller Shaft Assembly - Honda TRX500FM Service Manual

ASSEMBLY
SEAL LIP
PROPELLER
SHAFT
Place the inner boot bands [1
J
on the propeller shaft,
Do
nola/low /he
Apply molybdenum disulfide grease to the seal lip of
sea/ lip 10 tum inside
each boot.
OUI.
Install the boots (2) onto the shaft grooves, being
careful nol to damage the seal lip.
Install the boot bands into the each boot groove.
Install the jOint spring [31 into the propeller shaft
securely.
Apply 5 - 8 9 of molybdenum disulfide grease to the
propeller shaft joint splines.
Set the shaft joint [1
J
onto the propeller shaft while
compressing the spring, then install the boot [2J over
the shaft joint groove and the outer boot band 131 into
the boot groove to secure
it.
FRONT DRIVING MECHANISM
SEAL LIP
SPLINES
IS - 8 91
PROPELLER
SHAFT JOINT
131
121
19-15