Measure each follower bore 1 .0 .
SERVICE LIMIT: 22.54 mm (0.887 In)
Subtract each follower 0 .0 . from the corresponding
bore
1.0.
to obtain the follower-Io-bore clearance.
SERVICE LIMIT: 0.07 mm (0.003 in)
CAMSHAFT INSTALLATION
Coverlhepiston
Rotate the crankshaft to align
the "r
mark (IJ on the
with
a
shop lowe/or
flywheel with the index mark [2] on the crankcase coyer.
6qufllolent /0
protect
it
from
damage.
CYLINDER HEADNALVE
[2[
I
(1)
L
Lubricate the camshaft bearing and journal with engine
====--=============::;
oil.
Apply molybdenum oil solution to the cam lobes.
-
-
•
,
lubricate the cam chain [1) whole surface with engine
oil and install it on the cam sprocket.
Loosely install the camshaft [2] into the crankcase.
10-23