FRAME/BODY PANELS/EXHAUST SYSTEM
TOOL BOX LID
2-10
Remove the rear fender cover (page 2-9).
Remove the following:
-
brakellaillighl 3P (Black) connector [1] (release from
the holder plate [2) and disconnect
it}
- wire
clip [31
-
brakeltaillight wire (4] (from the wire guides)
-
1001
box
lid [5]
(from
the pivots (6])
Installation is in the reverse order of removal.
[1[
[2[
[4[
[5[