FRAME/BODY PANELS/EXHAUST SYSTEM
FRONT FENDER/CARRIER
REMOVAL/INSTALLATION
2·8
Remove the fuel tank cover (page 2-5).
Remove the front grille (page 2-7)
Remove the following :
-
accessory socket 2P (Black) connector (1
J
-
headlight 3P (Black) connector [2] (release from the
side air guide plate and disconnect it)
-
ten trim clips [3]
-
six 8 mm bolts [4}
-
fron t fender/carrier assembly [5J
Installation is in the reverse order of removal.