Quick Connect Fitting Installation; Fuel Pump Side - Honda TRX500FM Service Manual

QUICK CONNECT FITTING
INSTALLATION
NOTE :
Always replace the retainer and connector damper
of the quick connect filting when the fuel feed hose is
disconnected.
If any retainer needs replacing. use the same
manufacturer's relainer as the ones being removed
(The various manufactures feature different retainer
specifications).
Do not bend or twist fuel feed hose.
FUEL PUMP SIDE
1. Insert a new retainer
111
into the connector [2].
NOTE
Align the retainer locking pawls with the connector
grooves.
2. Set a new connector damper 11] to the
pipe
end as
shown.
Then press the quick connect fitting 121 onlo the pipe
until both locking pawls (3) lock with a
NOTE '
Align the retainer groove with the connector damper
tabs.
If
it
is hard to connect, put a small amount of engine
oil on the pipe end.
3. Make sure the connection is secure and thai the
locking pawls [1} are firmly locked into place; check
visually and by pulling the connector (2).
4. Make sure the connector damper [3] is positioned
correctly (between the pipe (4) and retainer tabs [5]).
5. Increase the fuel pressure and check that there is no
leakage in fuel supply system (page 7-11).
Align
121
FUEL SYSTEM
121
(11
12(
_ __ 1
3
1
(11
141
(3(
(5(
7-9