Alternator/Starter Clutch - Service Information; Alternator/Starter Clutch - Specifications; Alternator/Starter Clutch - Torque Values - Honda TRX500FM Service Manual

ALTERNATOR/STARTER CLUTCH
SERVICE INFORMATION
GENERAL
This section covers service of the alternator stator, flywheel and starter clutch . To service these parts. the engine must be
removed from the frame (page 15-2).
Transmission lubricating oil is fed through the oil passages in the rear crankcase cover. Ctean the oil passages before installing
the cover.
For alternator stator inspection,
see
Battery/Charging System section (page 21 -10)
For starter motor servicing. see Electric Starter section (page 6-6).
SPECIFICATIONS
ITEM STANDARD
Starter driven gear boss 0 .0 . 51 .705 - 51 .718 (2 .0356 - 2.0361)
= = =---' -
_ _ _ -!--.;; 31.946- 31 .962 (1 .2577 - 1.2583)
Crankshaft 0.0. at starter driven gear 31 ,884 31 .900 (1 ,2553 - 1.2559)
TORQUE VALUES
C 'TY
+
THREAD TORQUE
DIA. (mm) N'm (kgf'm , tbUt)
6 8 37 (3 .8. 27)
12
108 (11 .0, 80)
ITEM
I
Starter clutch bolt
Flywheel bolt (U.S,A. type)
I
I CKP sensor boll
1
12 108(11 .0. 80)
2
FtywheeVdriven pulley bolt (Canada type)
13-4
Unit: mm (in)
SERVICE LIMIT
51.69 (2.035)
31 .90 (1.256)
31.85 (1 .254)
REMARKS
Apply tacking agent to
the threads.
Apply engine oil to the
threads and seating
surface.
Apply engine oit to the
threads and seating
surface.
Apply locking agent to
the threads.