Alternator/Starter Clutch Specifications; Sub-Transmission Specifications; Crankshaft/Automatic Transmission Specifications - Honda 2005-2008 RX500 FA Service Manual

'61HN252' by American Honda Motor Co. - Page 15 of 540
[2005-2008] [TRX500 FA/FGA]

ALTERNATOR/STARTER CLUTCH SPECIFICATIONS

Starter driven gear boss O.D.

SUB-TRANSMISSION SPECIFICATIONS

Shift fork
Transmission

CRANKSHAFT/AUTOMATIC TRANSMISSION SPECIFICATIONS

Crankshaft
1 of 1
ITEM
ITEM
I.D.
Claw thickness
Shaft O.D.
Gear I.D. D., R., L.
Reverse idle
Gear bushing O.D. D./R.
L.
Gear-to-bushing D., R.
clearance
L.
Gear bushing I.D. D./R.
Reverse idle shaft O.D.
Reverse idle gear-to-shaft clearance
ITEM
Runout
Big end side clearance
Big end radial clearance
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
GENERAL INFORMATION
STANDARD
51.705 51.718 (2.0356 2.0361)
STANDARD
11.000 11.021 (0.4331 0.4339)
4.93 5.00 (0.194 0.197)
10.966 10.984 (0.4317 0.4324)
28.020 28.041 (1.1031 1.1040)
14.000 14.018 (0.5512 0.5519)
27.979 28.000 (1.1015 1.1024)
27.984 28.005 (1.1017 1.1026)
0.020 0.062 (0.0008 0.0024)
0.015 0.057 (0.0006 0.0022)
25.000 25.013 (0.9843 0.9848)
13.966 13.984 (0.5498 0.5506)
0.016 0.052 (0.0006 0.0020)
STANDARD
0.05 0.65 (0.002 0.026)
0.006 0.018 (0.0002 0.0007)
Unit: mm (in)
SERVICE LIMIT
51.705 (2.0356)
Unit: mm (in)
SERVICE LIMIT
11.04 (0.435)
4.5 (0.18)
10.96 (0.431)
28.07 (1.105)
14.04 (0.553)
27.93 (1.100)
27.93 (1.100)
0.10 (0.004)
0.10 (0.004)
25.04 (0.986)
13.93 (0.548)
0.10 (0.004)
Unit: mm (in)
SERVICE LIMIT
0.15 (0.006)
0.8 (0.03)
0.05 (0.002)
1-9
3/9/2008 10:24 PM