Pool Setting - TP-Link T3700G-28TQ User Manual

10.4.2 Pool Setting

This page shows you how to configure the IP pool in which the IP address can be assigned to the
clients in the network.
Choose the menu Routing→DHCP Server→DHCP Server Pool to load the following page.
The following entries are displayed on this screen:
DHCP Server Pool

Pool Name:
Network Address:
Subnet Mask:
Lease Time:
Default Gateway:
DNS Server:
Pool Table

Select:
Pool Name:
Network Address:
Subnet Mask:
Lease Time:
Figure 10-12 Pool Setting
Enter the name of the pool.
Specify the network number of the IP addresses in the pool.
Specify the corresponding subnet mask of the IP address in the
pool.
Specify the lease time of IP addresses in the pool.
Specify the IP address of the default gateway for a client.
Specify the IP address of the DNS server for a client.
Select the entry to delete the IP pool.
Displays the name of the IP Pool.
Displays the network address of the IP Pool.
Displays the subnet mask of the IP Pool.
Displays the lease time of the IP Pool.
153