Packet Statistics - TP-Link T3700G-28TQ User Manual

The following entries are displayed on this screen:
Profile and Max Group Binding

UNIT:
Select:
Port:
Profile ID:
Max Group:
Overflow Action:
LAG:
Clear Binding:
Note:
1. Multicast Filter feature can only have effect on the VLAN with IGMP Snooping enabled.
2. Multicast Filter feature has no effect on static multicast IP.
Configuration Procedure:
Step Operation
1 Create Profile
2 Configure IP-Range
3 Configure Profile Binding
for ports

9.5 Packet Statistics

On this page you can view the multicast data traffic on each port of the switch, which facilitates you
to monitor the IGMP messages in the network.
Select the unit ID of the desired member in the stack.
Select the desired entry for configuration.
It is multi-optional. Displays the port number.
The existing Profile ID bound to the selected port.
The maximum multicast group a port can join.
The policy should be taken when the number of multicast group a
port has joined reach the maximum.
Drop: drop the successive report packet, and this port cannot

join any other multicast group.
Replace: when the number of the dynamic multicast groups

that a port joins has exceeded the max-group, the newly
joined multicast group will replace an existing multicast group
with the lowest multicast group address.
Displays the LAG number which the port belongs to.
Click the ClearBinding button to clear all profiles bound to the
port.
Description
Required. Configure
Multicast→Multicast Filter→Profile Config page.
Required. Click Edit of the specified entry in the IGMP Profile
Info table on Multicast→Multicast Filter→Profile Config
page to configure the mode or IP-range of the Profile.
Optional. Configure
Multicast→Multicast Filter→Porfile Binding page.
138
the Profile ID and
Profile Binding for
mode on
ports on