Packet Statistics - TP-Link JetStream T1500G-10MPS User Manual

Profile and Max Group Binding

UNIT:1/LAGS:
Select:
Port:
Profile ID:
Max Group:
Overflow Action:
LAG:
Clear Binding:
Configuration Procedure:
Step Operation
1 Create Profile
2 Configure IP-Range
3 Configure Profile Binding
for ports

8.1.8 Packet Statistics

On this page you can view the multicast data traffic on each port of the switch, which facilitates
you to monitor the IGMP messages in the network.
Choose the menu Multicast→IGMP Snooping→Packet Statistics to load the following page.
Click 1 to configure the physical ports. Click LAGS to configure
the link aggregation groups.
Select the desired entry for configuration.
It is multi-optional. Displays the port number.
The existing Profile ID bound to the selected port.
The maximum multicast group a port can join.
The policy should be taken when the number of multicast group
a port has joined reach the maximum.
Drop: Drop the successive report packet, and this port can

not join any other multicast group.
Replace: When the number of the dynamic multicast

groups that a port joins has exceeded the max-group, the
newly joined multicast group will replace an existing
multicast group with the lowest multicast group address.
Displays the LAG number which the port belongs to.
Click the ClearBinding button to clear all profiles bound to the
port.
Description
Required. Configure
Multicast→IGMP Snooping→Profile Config page.
Required. Click Edit of the specified entry in the IGMP
Profile Info table on Multicast→IGMP Snooping→Profile
Config page to configure the mode or IP-range of the
Profile.
Optional. Configure
Multicast→IGPM Snooping→Porfile Binding page.
107
the Profile ID and mode
Profile Binding for
on
ports on