Start Timer - Konica Minolta DRYPRO Model 793 Operation Manual

Ch.4 Maintenance Mode
4-4-11 START TIMER <TIMER SETUP>
How to set the Start Timer is detailed below.
Startup time can be set for each day of the week using the Start Timer function.
3
4
7
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
1
Switch to the Maintenance Mode.
2
Touch the [TIMER SETUP] button on the "Main-
tenance" screen.
3
Touch the [START TIMER] button.
- "START TIMER" screen will be displayed.
- Touching the [RETURN] button will shut down the
"Maintenance Mode" and return to the Normal screen.
4
Touch the up/down arrow [▲][▼] buttons, and
select the day to be set.
- Setup items for the selected day will be displayed in the
field to the right.
5
Touch the buttons in the field to the right, and
select ON/OFF, hour, minute of the Start Timer.
- The button selected in "Use Start Timer?" will be dis-
played in white.
- Touch either of [t], [s] buttons to change the "Hour" by
increments of one hour.
5
- Touch either of [t], [s] buttons to change the "Min" by
increments of one minute.
6
Repeat the step 4 and 5 to set the start timer for
each day.
7
Touch the [SAVE] button.
- Returns to the "Maintenance Mode (TIMER SETUP)"
screen after saving the settings.
< 82 >
User Level
1 2 3
● ● ●
Disp
●
Ope
p.31 Shutdown
using the

Start Timer

p.52 Switching to
the Mainte-
nance Mode
When settings are
changed in the right
field, it will be reflected
upon the list on the left
as the [Save] button is
pressed.